Operation Manual

Simrad PI54
200
850-165186 / Rev.B
Navigation setup
Two Navigation setup dialogues may be accessed:
• From the Highway display presentation
• From the Setup menu
In both cases, settings are provided to set up the PI54
parameters related to the navigation display presentation. The
parameters defined for the Highway presentation are specific
for that presentation only. The Navigation setup choice on the
Setup opens the Pilot/Position setup dialogue with parameters
valid for the entire PI54 operation.
Highway display presentation parameters
To access the parameters, press the ADJ (Adjust) or ENT
button when you have the navigation display (”Highway”) in an
active window.
XTE distance: Define how large crosstrack error the PI54 can
accept before the alarm is triggered.
Pilot/Position setup
These settings are used to set up the PI54 parameters related to
the navigation display presentations. To access the parameters,
press the MENU button to open the main menu. Select the
Setup menu (4) and then Pilot/Position Setup (1).
Display position as: Select how you wish the position data to
be displayed; LAT/LON (Latitude/Longitude), LORAN C or
DECCA.
Display speed as: Select how you wish the speed information to
be displayed; SOG (speed over ground) or STW (speed through
water).