Operation Manual

References

203

850-165186 / Rev.B

Offset adjust

These settings are used to set up offset values for the Depth and

Spread sensors.

To access the parameters, press the MENU button to open the

main menu. Then, open the Setup menu (4) and select Sensor

alarm/calibration (4). When the dialogue opens, press the

GAIN+ button four times to open the Offset adjust dialogue.

When accessed, this dialogue will only display the Depth and

Spread sensors currently configured. Offset adjustments can be

only be made on the listed sensors. Enter a negative or positive

value to decrease or increase all readings from the chosen

sensor.