Operation Manual

References

219

850-165186 / Rev.B

Surface temperature setup

These settings are used to set up the PI54 presentation

parameters related to the surface temperature presentation.

To access the parameters, press the ADJ (Adjust) or ENT

buttons when you have a Surface temperature display in the

active window.

Temperature scale max/min: Use these settings to define the

maximum and minimum values in your temperature scale.

Temperature grid: When enabled, this function places

horizontal grid lines in the temperature graph to make it easier

to read the data.

Temperature offset: Using this function, you can add or

subtract a fixed termperature value for compensate for known

deviations in the sensor.

Average of temperature readings: If you wish to read the

averga temperature, you must define how many readings to take

before the result is computed.