Operation Manual

Simrad PI54
12
850-165186 / Rev.B
If you change your page configuration from full screen (one
window) to two or four windows, you may see that one or more
windows will not display any information. If this is the case,
observe the procedure below.
To define window information
This procedure explains how to set up the information in a
window using the WIN button and the main menu.
1 If your current page contains mor e than one window, press
the WIN button to select active window.
- The active window is identified by its red border.
2 Press the MENU button to open the main menu.
3 Use the selector tab, and move the cursor to the Fishery
menu.
4 Select one of the options on the menu.
- If a menu option is shown with red print, it means that
the information can not be displayed with the currently
selected window size. Select an other presentation.
- You can also select the menu option using the
corresponding alphanumer ical button. You might find
that easier to do!
5 Press the ENT button.
- The PI 54 will return to the previous page, and the
information you chose on the Fishery menu will
appear in the selected window.
Window sizes and information
Observe the table below to see which modes that can be used in
each window size.
Window size FULL HALF QUARTER
Numeric display -- Yes Yes
Graphic display Yes Yes Yes
Surface temperature Yes -- Yes
Status display Yes -- --
Echo display Yes Yes Yes
Pilot display Yes -- Yes