Operation Manual

Simrad PI54
232
850-165186 / Rev.B
ID UseButton/Function
4 Terminate communication Click to disconnect the sensor from the PC.
5 Message field Displays program and sensor data.
6 Communication channel Select channel number to be uploaded to the sensor. If
a Twin Spread sensor is connected, two
communication channels must be defined.
7 LED control Click and drag the slider bar to control the behaviour of
the sensor’ s internal LED.
8 Ping control Click and drag the slider bar to control how often ther
sensor will transmit (”ping”).
9 Sensor type Displays the sensor type.
10 Data update rate Select the time interval between data transmissions
from the sensor.
11 Remote Only available for Twin Spread sensors, used to
defined the set of Remote sensors to be used in the
Twin Spread system.
Number Only available for Remote sensors, used to define its
identification number (1 -- 4)
12 Show channel at startup Click to activate or deactivate the sensor’s internal LED
identification flash.
13 PI Configurator title Displays current software version.
14 Serial number Displays the sensor’s serial number. This parameter is
not available for PS sensors.
15 Dialogue box function buttons Standard operating system functionality.
16 Communication port setup Click to select which COM port you use to
communicate with the sensor.
17 Language Click to change language.
18 Help Click to open on--line help.
19 Factory default Click to configure the sensor with the corresponding
factory default settings.
20 Indicator lamp Indicates sensor interrogation.
21 Quit Close the PI Configurator utility.