Operation Manual

PI Configurator
239
850-165186 / Rev.B
How to upload factory settings
Once the sensor is connected to the computer, and you have
established communication, you can use the PI Configurator
utility to upload the applicable sensor’s factory settings.
1 Click the Read Senor Data button.
- Observe that the current sensor conf iguration
parameters are displayed in the message field. The
information includes sensor type, channel number, and
the sensor’s software version.
2 Click the Factory default button to retrieve the def ault
parameters for the current sensor.
3 Press Configure sensor button to upload the parameters
to the sensor.
4 Press Terminate communication, and disconnect the
sensor.