Operation Manual

Simrad PI54
242
850-165186 / Rev.B
Communication Port Setup
This button opens the ComPortSetupdialogue. The integrated
slider bar is used to designate which COM port (COM1 to
COM8) the programming cable is plugged into. COM1 is the
factory default setting and recommended parameter.
Operation
To operate, click the Communication Port Setup button to
open the ComPortSetupdialogue box. Click on the desired
port, or use the slider bar to select. Click OK to save and exit.
If the chosen COM port i s unavailable on the computer, a
corresponding message will inform you about this.