Operation Manual

Simrad PI54
14
850-165186 / Rev.B
The right side may have been pr edefined to provide an other
display presentation, or it may simply show the text Select
display via MENU. In order to fill the space,proceed as follows:
7 Press the WIN button, and observe the red border moving
from one window to the next. Place the border on the
window you wish to define.
8 Press the MENU button to access the main menu.
9 Press the Selector pad to move the cursor (inverse video)
to the Echo menu.
10 On the Echo menu, select Echo 200 kHz.
11 Press the ENT button to acknowledge.
The 200 kHz echo sounder will now appear in the chosen
window.
Page 3: Graphic display
1 Press the PAGE button once to select the next display
page.
2 Press the MENU button to bring up the main menu.
3 Press the Selector pad to move the cursor (inverse video)
to the FISHERY choice on the main menu.
4 Observe the WIN icon at the top right corner of the
display. Press the WIN button repeatidly until the blue
rectangle covers the entire icon.
5 On the Fishery menu, select Graphic display, Echo 38
kHz.
6 Press the ENT button to enter the choice.
The graphic display appears with the sensor data shown on the
top and the echo sounder shown below. If you already know
how to set up the basic parameters you can access the Echo
quick menu by pressing the ENT button one more time.
Page 4: Navigation display
1 Press the PAGE button once to select the next display
page.
2 Press the MENU button to bring up the main menu.
3 Press the Selector pad to move the cursor (inverse video)
to the PILOT choice on the main menu.
4 Observe the WIN icon at the top right corner of the
display. Press the WIN button repeatidly until the blue
rectangle covers the entire icon.