Operation Manual

Simrad PI54
262
850-165186 / Rev.B
Programming modes
Available
modes
The PI Configurator utility has two programming modes:
• Standard - default mode, described in this manual.
• Professional - for use by Simrad personnel only.
Caution: The use of PI Configurator software in the Professional
mode is for qualified
Simrad personnel only. Improper
use of PI Configurator softw are in the Professional
mode can cause permanent, irreparable damage to
sensors. It must therefore never be activated by
unqualified personnel.
To change mode
To activate PI Configurator software in the Professional mode:
1 Close the PI Configurator utility.
2 Open the folder C:\Program Files\PI Configurator.
3 Find the f ile named ps30_cfg. ini and open it with a text
editor.
4 Locate t he line of code that contains the word
STANDARD and overwrite it to PROFESSIONAL.
Make sure that have a <return> character after the last
word!
5 Save the ps30_cfg.ini file.
6 Restart the PI Configurator software.
If you install a new software version, you must repeat this
provedure.
After changing modes
After activating PI Configurator software in the Professional
mode, the start up screen will display:
UKB (unchanged)
COM1 (unchanged)
PROFESSIONAL (previously STANDARD)