Operation Manual

Software updates
299
850-165186 / Rev.B
pi_swu_dsp_upload_ins (English)
032.06.05 RBr: Established
PI DSP Upload
Purpose
The PI DSP Upload application is used to upload DSP (Digital
Signal Processor) software to the PI54 Operator Unit. The
application runs on a standard computer with operating systems
Microsoft® Windows 2000® or Windows XP®.
= pi_swu_dspsw
How to install the application
The PI DSP Upload application is provided on an .exe file. To
install, observe the following procedure.
1 Locate the *.exe file, and double-click on it to start the
execution.
2 Select a temporary directory to save the installation files.
3 Press the Start button in the lower left corner of your
display, and select Run.
4 Select the directory you placed the installation files in, and
select Setup.exe.PressOk to start the installation.
5 Further guidance is provided by the installation program.
How to run the application
In order to run the PI DSP Upload program, you must access it
from the Start button in the lower left side of your screen.
Select Programs, and locate the application on the menu.
How to remove the application
If you wish to remove the application from your computer, you
must locate the directory where the files are located, and then
delete all the files and the directory. The default directory is:
c:\program files\PI DSP Uload
Then you must manually remove the program short-cut from the
Programs menu. To do this, find the shortcut file and delete it.
On a Windows XP computer, you will fi nd this file at the
following location:
c:\documents and settings\<your logon>\start menu\programs