Operation Manual

Operator manual

850-165186 / Rev.B

Sections

1Introduction

This section introduces the PI54 catch monitoring system operator manual.

Refer to page 1.

2 System description

This section provides a general i ntroduction to the PI54 catch monitoring

system and the units in use. Refer t o page 3.

3 Getting started

This section provides general guidelines to help you get started with the PI54

catch monitoring system. Refer to page 9.

4 Applications

This section gives an overview of the various applications that the PI54 can

offer. Refer to page 25.

5 Display modes

This section gives an in--depth description of all the display presentations.

Refer to page 32.

6 Operational procedures

This section provides detailed procedures to guide you through the most

common functions. Refer to page 55.

7 Practical use of the sensors

This section describes how to install and use each sensor type. Both PI and PS

sensors are described and explained. Refer to page 103.

8 Sensor chargers

This section describes how to install and use the sensor chargers. Refer to page

164.

9Menusystem

This section allows you to access the reference information from the menu

structure. Refer to page 169.

10 References

This section details the various setup pages, those selected from the menu

system and those accessed from the display presentation. Refer t o page 173.

11 PI Configurator

This section explains how to use the PI Configurator utility to change the

sensor’s communication channel and update rate. Refer to page 226.