Operation Manual

Simrad PI54
40
850-165186 / Rev.B
Temperature presentation
The temperature sensor presentation i s shown below.
(A) The character and the number identifies the type of sensor,
and which identification number the sensor has on the PI54
system. In this example, T2 means that it is a temperature
sensor, and that it is sensor no.2.
(B) Temperature readout.
(C) Unit of measure in Celcius or Fahrenheit. When
presentation space is limited, the unit of measure is shown in the
top left corner.
(D) Temperature trend, indicates if the temperature is falling or
rising. An arrow pointing up this indicates that the temperature
is increasing, while an arrow pointing down indicates decreasing
temperature.
(E) Graphic alarm. The direction of the triangle indicates if the
temperature is higher or lower than a predefined limit.
(F) Yellow pulse lamp blinks each time a signal is received from
the corresponding sensor.
(G) Interference warning, activated when the PI54 detects
interference from other nearby vessel(s) operating on the same
channel or with similar hydroacoustic equipment. Contact your
Simrad dealer to select a different frequency should this
problem persist.