Operation Manual

Display modes
45
850-165186 / Rev.B
Surface temperature
The Surface temperature display shows the current
temperature. By means of the graph it will also s how you the
temperature history for the past minute. The presentation is
activated from the Fishery menu. To have this information
available, you must have the relevant temperature feeler
connected to your PI54 system. A suitable feeler is integrated
with several Simrad echo sounder transducers, or it may be
connected as a separate peripheral.
To change presentation parameters
The graphic display presentation is controlled by the parameters
defined in the setup. To change the surface temperature
parameters, press the ENT or ADJ buttons to access the
Surface temperature setup.
Related topics
→ Surface temperature setup, page 219