Operation Manual

Simrad PI54
56
850-165186 / Rev.B
How to define sensor presentation
The information from the various sensors are provided by the
Numerical display, where each sensor is presented in its own
rectangular data winsow.
How to show or hide the graphic alarm
1 Ensure that you have a Numeric display presentation in
your active window.
2 Press the ADJ button to open the Numeric setup
dialogue.
3 Switch Show graphic alarm on or off.
4 Press the ENT button to save the parameters and exit.
How to show or hide the sensor timers
Sensor timers are only used on Catch and Bottom Contact
sensors.
1 Ensure that you have a Numeric display presentation in
your active window.
2 Press the ADJ button to open the Numeric setup
dialogue.
3 Switch Sensor timer on or off.
4 Press the ENT button to save the parameters and exit.
How to reset the sensor timers
Sensor timers are only used on Catch and Bottom Contact
sensors.
1 Ensure that you have a Numeric display presentation in
your active window.
2 Press the ADJ button to open the Numeric setup
dialogue.
3 Set Reset sensor timers to YES.
4 Press the ENT button to save the parameter and exit.
5 Press the ENT button one more time to accept the process.
The next time you access the Numeric setup dialogue, the value
for Reset sensor timers is NO.
How to change the background colour
You can change the background colours on the rectangular data
windows in order to easily distingush them from each other.
1 Press the ENT button to open the manin menu.