Operation Manual

Simrad PI54

850-165186 / Rev.B

Howtoviewechosounderdata

When you have chosen the Graphic display presentation, you

can choose to superimpose the information from the echo

sounder. This feature allows you to see where your sensors are

located in relation to the bottom and fish echoes. Note that this

feature will only work if you have mounted an echo sounder

transducer to the PI54.

1 Make sure that a Graphic display presentation is active.

2 Press the ADJ button to open the Graphic setup

dialogue.

3 Locate the setting Superimpose echo sounder, and set the

option to ON.

4 Press the ENT button to save the setting and close the

dialogue.