Service manual

DSC IDENTIFIER (MMSI) Stores Maritime Mobile Service Identity

(MMSI) number.

ATIS IDENTIFIER Stores Automatic Transmission Identification

System (ATIS) Number.

INITIAL SET UP

The PR68 programming kit operates in conjunction with an IBM compatible PC.

The programme should be copied to the 'C’ drive on the PC hard disc into a

directory entitled RD68DATA

If using a monochrome monitor type MODE BW80. Connection between the

radio and PC is by means of the programming lead supplied with the kit from

the radio Mic Socket, on the front of the radio, to a 9 pin serial port on the PC.

Enter the programming set up software by typing “Prog68”. Place the radio into

programming mode by holding Soft Keys 1 and 3 and the LIGHTS Key whilst

powering up. Programming is entirely menu driven and self-explanatory.

RD68 RADIO CONFIGURATION PROGRAM

---------------------------------------------------------

Version 1.1

This program allows the dealer to configure the RD68 series

radios to any mode including the programming of private channels.

WARNING

--------------

Incorrect use of this program could enable the radios to be used

in contravention of local regulations.

Which COM port is to be used? (1 or 2)

Type 1, 2 or [ESC] to exit program