Installation manual

Parameters
99
850-164186 / Rev.D
Audio Volume
The Audio Volume is accessed from the Horizontal and
Vertical menus.
The Audio Volume in the loudspeaker can be selected in 10
steps. The audio channel, from which the audible information is
retrieved, is shown with a continuos white line. This line can be
trained by using the training controls on the Sonar Operating
Panel or the Train button in the menus.
The audio signal can easily be muted by the Mute control on the
Sonar Operating Panel, or by the Mute button the Display
menu. Both these buttons work as a toggle switch, which means
that the second press on the switch will recall the audio signal.