Installation manual

Simrad SP70

104

850-164186 / Rev.D

Bearing (Vertical)

The Bearing (Vertical) parameter is accessed from the Vertical

menu.

This dialogue allows you to train the audio channel bearing

manually. The Bearing of the audio channel is normally

controlled with the Train buttons on the Sonar Operating Panel.

The bearing of the vertical slice, which is presented by the white

audio line in the horizontal picture, may also be trained by the

Bearing buttonintheHorizontal menu.

The following options are available:

- (minus button) - Train left.

+ (plus button) - Train right.

More information about the Train control is provided in the

Sonar Operating Panel chapter.