Installation manual

Parameters
139
850-164186 / Rev.D
Recall
The Recall button is located in the Store/Recall menu, which is
accessed from the Setup menu.
The Recall button is used to retrieve the previously stored
display information. You can select which storage image you
wish to see by selecting it from the list of temporary or
permanent files, or start a playback sequence. When a playbeck
sequence is finished, the last picture of the sequence will remain
“frozen” on the display.
The recalled image is clearly identified with the word “Recall”.
To exit the recall mode, press the Object button on the Sonar
Operating Panel or the right mouse button.
Recall Mode
The Recall Mode button is located in the Store/Recall menu,
which is accessed from the Setup menu.
The Recall Mode menu is used to select the replay function of
the Record button on the Sonar Operating Panel and the Recall
buttonintheStore/Recall menu.
The Record button is described in the Sonar Operating Panel
chapter.
Related topics
 Sonar Operating Panel; Record, page 42