Installation manual

Simrad SP70

152

850-164186 / Rev.D

Store

The Store button is located in the Store/Recall menu, which is

accessed from the Setup menu.

The Store button is used to store display information. This may

be a sequence loop or single display pictures, as selected in the

St ore mode dialogue.

If a sequence loop storage is selected, the St ore button is used

for start and stop of the storage. If single picture storage is

selected, a new picture storage is made each time the Store

button is pressed.

Store Mode

The Store Mode button is located in the Store/Recall menu,

which is accessed from the Setup menu.

The Store Mode dialogue is used to select the storage function

of the Record button on the Sonar Operating Panel and the

Store buttonintheStore/Recall menu. The storage can be

selected to contain single shots, or different ping- or time

sequences.