Installation manual

Simrad SP70

850-164186 / Rev.D

270° / Vertical

The 270° / Vertical mode is specially designed for purse

seining. The vertical half slice is displayed in the lower left

corner for normal setting with the net on the starboard side. If

the net is set on the port side, the 60 degrees vertical slice will

be displayed in the lower right hand corner.

With this presentation, it is easy to keep the best contact with a

school in both the vertical and horizontal presentation, and to

determine its size distribution. The position of the school

relative to the bottom is another important information provided

by this presentation. The Catch data presentation for purse

seining is shown on the right hand side. It shows all the net data

relative to the target and the bottom, as well as all available

target data.