Installation manual

Simrad SP70
40
850-164186 / Rev.D
When the Auto Tilt function is activated in the Position Track
mode the tilt search centre is automatically adjusted with regard
to the distance to the tracked position.
Target track
To track a target, place the cursor over the desired location and
press the Target Track button. A circle will appear on the
display and its position automatically tracked by the system
using the strongest echo centred in the ”window” represented by
two lines on the audio line. The “window’s” size may be
selected by the Track Window buttonintheSetup menu.
The vector originating from the target’s centre indicates its
course and speed. The length of the vector increases relative to
the target’s speed. One knot is represented by a small mark on
the vector. A course line can also be displayed showing the
target’s track.
Target tracking symbols and data are displayed with a light
violet colour. In addition to the information on the Catch data
page, the speed, course and distance for some modes are found
in the lower left hand corner of the screen.
In Manual tilt mode, the tilt angle will automatically be
adjusted with respect to the distance to the tracked target.
When the Auto Tilt function is activated in the Target Track
mode, the tilt search centre is automatically adjusted with regard
to the distance to the tracked position.
Note Manual training overrides the Target Tracking function.