Installation manual

Operation
49
850-164186 / Rev.D
Screen presentations
The menu can be set up for permanent display, or available only
when required for parameter alterations. The Menu button on
the Sonar Operating Panel is used to select Menu or Full
Screen presentation.
Typical screen
presentation with
themenuonthe
right hand side
(CD15008A)
In Menu presentation, the menu is always shown on the right
hand side of the display, and the size of the echo area will be
reduced. When Full Scr een is selected, the echo presentation is
extended to cover the entire display.
 A standard menu presentation is shown in above.
 A full screen presentation with the menu disabled is shown
below.
Once the menu has been disabled, observe the following
procedure to recall it for temporary use.
1 Use the trackball, and move the cursor to the outmost left-
or right hand side on the display.
2 Observe the menu appear on top of the echo area, and that
the remaining echo area is not re-scaled.
3 Move the cursor outside the menu, and observe that it
disappears.