Operation Manual

Handset

Configuration

4.2.3.2 Product info

When “Product Info” is selected from the “Installation” menu, the

Software Version and Serial Number is displayed for both the

Handset and Basestation (Fig. 4.6).

To return to the setup list press

4.2.3.3 Reset B/station

The BaseStation is always powered on when it is connected to a

live SimNet system. The “Reset B/Station” function essentially

switches the BaseStation off and then on again. This has the

advantage that it can be done remotely from the handset no matter

where the BaseStation is mounted.

To switch the BaseStation off and then on again select "Reset

B/Station" from the "Installation" menu and press



ENU. The reset

is executed immediately. Press

to return to the previous menu.

4.2.3.4 Reset defaults

This function will set user configurable variables back to the

factory preset values.

4.2.3.5 S/W upgrade

In the event that software upgrades become available these can be

downloaded to the WR20 over Bluetooth. Instructions for

downloading will be supplied with the software upgrade.

4.2.4 Phone setup

From the “WR20 Setup” menu your WR20 can be paired with

many makes of mobile phone that feature Bluetooth Headset

support. The “Phone Setup” menu allows this feature to be enabled

WR20 Remote Commander

Fig. 4.6 - Product Info

mêçÇìÅí=

fåÑç

toOM

t_OM

MMKPN

t`MMMMVP

MMKOO

t`MMMMVQ

ptW

pkW

ptW

pkW