Operation Manual

Product Selection
5 PRODUCT SELECTION
5.1 Product recognition
Only WR20 compatible products will be available for selection.
5.2 Selecting from a list
Press the PRODUCT key to display a list of products connected to
the SimNet Network (Fig. 5.1).
Use the
V or W keys to highlight the product you require.
If there are more items above those being shown, then
V will be
displayed in the top left corner of the LCD. If there are more items
below those being shown, then
W will be displayed in the bottom
left corner of the LCD.
Pressing the

M
ENU or  key will select the product. The display
will now show the current status of that selected Item.
Pressing the
 key will return you to the previous menu.
If a product is not available the display will show the product name
at the top of the display and the message.
“
Product Not Available”
A product will become
“Not Available” if it is under control from a
local control at the same time you wish to access it from your handset.
5.3 Disabling remote control
It may be desirable to inhibit remote control of specific products in
the network. Details for enabling or disabling remote control can
be found in the product’s operating instructions.
Product Selection
31
Fig. 5.1 - Product List
W
V
pÉäÉÅí=
=
mêçÇìÅí
^mORJN
opUMJO
`uPQJO
fpNO
F
^ìíçéáä= K=K
`ä~ëë= a
k^spq^q=K=K=
fåëí= póë