Operation Manual

Autopilot

6.3 Standby mode

To gain control of the Autopilot, press STBY/A

UTO

key. The

“Inactive” symbol disappears from the display, and the MODE

SoftKey function appears (Fig. 6.2).

In Standby mode pressing the

Port or X Starboard NavPad key

will control the rudder. If either key is pressed, the display will

indicate “Power Steer” (Fig. 6.3).

Note As rudder is added in either direction, the display will change to

show a single arrow “

” and a double arrow “

ÌÌ

”.

6.4 Steering modes

Pressing the MODE SoftKey enters the steering mode menu,

“Standby” and “Auto Compass” will be listed as standard. Further

options such as Auto NoDrift, Auto Nav and Auto Wind, may be

listed depending on the settings of the Autopilot itself (Fig. 6.4).

Use the

V or W keys to scroll through the menu options. Press the



ENU key to select the mode you want to enter.

WR20 Remote Commander

Fig. 6.2 - Standby mode (Active)

^mORJNN

pq^ka_v

NPS°j

eb^afkdW

jlab

m••••••MR••••••p

Fig. 6.3 - Powersteer display

^mORJNN

pq^ka_v=

kcr

W mçïÉê=píÉÉê===X

NPS°j

eb^afkdW

jlab

P••••••15

ÌÌÌ

•••S