Operation Manual

Instruments

9 INSTRUMENTS

9.1 General

The WR20 Remote Commander can be used to control all of the

major functions of any WR20 compatible instrument that is

attached to the network.

Note In order to view Instrument data on the WR20 display, please refer

to section 11.2.

9.2 Display

After selecting “INST SYS” from the product list, the WR20

display will show a list of instruments attached to the network

(Fig. 9.1).

Using the

V or W keys, highlight the instrument you want to

control and press the



ENU or  key to select it.

If the list of attached instruments has more items above those being

displayed, then

V will be shown in the top left corner of the LCD.

If there are more items below those being displayed, then

W will

be shown in the bottom left corner of the LCD.

Once selected, the display shows a graphical representation of the

instrument keypad, together with the corresponding keys on the

WR20 handset that control their functions (Fig 9.2).

In the example shown, the “LIGHTS” key on the Depth instrument

is controlled by the



key, and the “DEPTH” alarm by the right

hand SoftKey on the handset.

Instruments

Fig. 9.1 - Instrument selection menu

pÉäÉÅí=

fåëí

fpNOJM= tfka

fpNOJM= `lj_f

fpNOJM= abmqe

fpNOJM= jbd^