Operation Manual

Data Displays

11 DATA DISPLAYS

11.1 General

The WR20 can display data from various sources on the network

simultaneously. The display is user configurable both in terms of

the type of data to be shown and also the number of lines of data in

the display (maximum of 4). If only 1 or 2 Data Items are to be

displayed, then the size of the displayed data is enlarged. The

units in which data is displayed are also selectable, please refer to

Section 4.2.2.

11.2 Display

After selecting “DataPages” from the product menu, the WR20

display will show a list of available pages (Fig. 11.1).

The pages are pre-configured at the factory however they can be

customised as required.

Using the

V or W keys, highlight the one you want to view and

press the



ENU or  key to select it.

If there are more pages above those being displayed, then

V will be

shown in the top left corner of the LCD. If there are more pages

below those being displayed, then

W will be shown in the bottom

left corner of the LCD.

Once a page has been selected, the display will show the Simrad Group

data associated with that page. An example is shown in (Fig. 11.2).

To scroll to the next data page press the

V or W key.

Fig. 11.1 - DataPages menu

bafq lkLlcc

a~í~m~ÖÉë

m~ÖÉ= O

m~ÖÉ= P

m~ÖÉ= Q

m~ÖÉ= R