Operation Manual

WR20 Remote Commander

Data Displays

Note Information from sources not controllable by the WR20 will be

displayed if the data has been converted to SimNet format. For

example, data from an NMEA source converted to SimNet using an

AT10 converter.

11.2.1 Selecting DataPages for viewing

For clarity and ease of use, DataPages can be turned off if not

required, so that when scrolling through them, only the ones you

wish to view are displayed.

From the “Edit DataPage” menu (Fig. 11.1), highlight the DataPage

you want to turn on or off and press the ON/OFF SoftKey. This

will toggle the state of that selected DataPage between “ ” (On),

and “ ”(Off).

11.3 Configuring DataPages

DataPages can be customised for user preference. Configuration

screens can be reached in one of two ways. Directly from the

“DataPage” menu by selecting the DataPage to be configured and

then pressing the EDIT SoftKey as shown in (Fig. 11.1).

Alternatively any DataPage that is being viewed can be modified

by pressing the



ENU key. Either method will take you to the

screen shown in (Fig. 11.3)

Fig. 11.2 - An example DataPage

a~í~m~ÖÉ==O

abmqeW

_pmbbaW

eb^afkdW

NNKO

TKM

NPM