Operation Manual

WR20 Remote Commander
66
Appendix
12.3 Troubleshooting
These simple checks should be carried out before seeking technical
assistance and may save time and expense.
Before contacting your servicing agent, please note the unit’s serial
number.
12.4 Spares & accessories
The following spares and accessories are available from local
Simrad agents.
EXPC05* VHF Cable (5 meters)
EXPC20* VHF Cable (20 meters)
LS80 External waterproof VHF Loudspeaker
MAR50 240v Mains Handset charger
* One off required to connect Basestation to RS80 series VHF.
Handset will not switch
on
Communication Failure
No backlighting
Product under control
not responding
Data missing from data
pages
• Battery Not Charged
• Handset out of Range
of Basestation
• Handset not Paired to
Basestation
• Light level set at 0
• Communication
conflict
• Only data that is on
the network will be
displayed
• Re-charge battery
• Move handset closer
to Basestation
• Pair Handset to
Basestation
( Section 12.2)
• Increase light level
(Section 4.2.1.1)
• Press product key to
refresh display
• Ensure data is being
sent out on the
network.
General Symptoms RemedyPossible Cause