Instruction Manual

BUTTON SEWING FOOT
This short, open foot
accommodates any
size sew-through
button, and holds it
securely for stitch
ing. The groove in
the foot allows for
insertion of a ma
chine needle, over
which a thread
shank may be form
ed.
The foQt is used in connection with the General
Purpose Feed Cover Plate.
Selector setting: AL
Stitch Width: 1 and 4
General Purpose Feed Cover Plate
Button sewing foot
Stitch length: above 20
Space between holes in button determines Stitch Width settings. Numbers 1 and 4 generally apply to
standard buttons. Number 1 setting is constant, but 4 can be increased or decreased to accommodate
buttons with unusual spacing.
Set Selector at AL and Stitch Width at 1. Attach general purpose feed cover plate to machine in place
of regular throat plate in same manner as instructed on page 18.
Position button under foot so that needle will enter into left hole. Lower foot. Turn hand wheel toward
you until needle rises out of fabric and is just above foot.
51