Instruction Manual

THE CORDING FOOT

•f: -i: #

# # # # f: |! # # # 'Is i| # # # # # t

This foot is designed to facilitate the placing of stitching close to a

raised edge. The hinged feature of this foot ensures even feeding over

pins, heavy layers of fabric or cross seams. It is attached to the machine

in place of the regular presser foot, and may be adjusted to either the

right or left side of the needle. Straight stitch or zigzag settings may

be used.

APPLICATIONS

Zip Fastener Insertions

Corded Seams

Tubular Cording

Slip Cover Piping

Preparation. Secure the cording foot to the pres

ser bar as you would the regular presser foot. Set

Selector and Lever. Adjustment to the right or left

of the needle is made by loosening the thumb screw

at the back. Check the position of the foot by

lowering the needle into the side notch, making sure

it clears the foot. Lock it into position bv tightening

the thumb screw.