Instruction Manual

fi' %

m % m m # -is- # # # #' ü ü ì* * # # -i? « » # ■# # # 'i? i

Fork

Arm

Adjusting

Finger

Adjusting

Lever

This attachment offers a simple and effective way

to make gathered and pleated ruffles. Ruffles may

be made separately or made and applied at the

same time. The ruffler is attached to the machine

in place ctf the regular presser foot and is used with

a straight stitch setting only.

Straight stitch setting: AK 3

Throat plate: Straight stitch

Ruffler

Adjusting Points

The adjusting lever sets the ruffler for gathers or

pleats. The number 1 space setting is for gathers

and places fullness at every stitch. Numbers 6 and

12 are space settings for pleats, spacing them 6 or

12 stitches apart. The star is for straight stitching

and is used when grouping gathers or pleats.

The adjusting finger is used only for pleating

and affects the width of the pleat. It is thrown out

of action by bringing it out of contact with the

adjusting screw.

The adjusting screw regulates the fullness of

gathers or pleats. When turned inward to its limit

with the adjusting finger in place, the attachment

is set for its deepest pleat. When turned outward

to its limit, with the adjusting finger out of action,

the ruffler gives only a hint of fullness.