Instruction Manual

ELECTRICAL INFORMATION

The SINGER* Electric Motor in the electric ma

chine is furnished for operation on an alternating

or direct current. Orders must state the catalogue

number of the motor, or the voltage, and in the

case of alternating current, the number of cycles.

Before Inserting Electric Plug A, be sure that

voltage and cycles stamped on electrical nameplate

B are within range marked on your electric meter

installed by your power company.

Electrical Connections for Machine. Push 3-pin

terminal plug C on 3-pin terminal block at right of

machine and connect plug A at other end of cord

to electric outlet.

Speed Controller. The speed of machine is regu

lated by amount of pressure on the pedal of the

foot controller D or the knee lever.