Instruction Manual

LIGHT
The light is turned "on" or "off" by the switch F.
To Remove Bulb. Remove screw H and lamp
cover E. Do not attempt to ynscrew bulb. Press it
into socket and at same time turn bulb over in
direction shown to unlock bulb pin G, then with
draw bulb.
To Replace Bulb. Press new bulb into socket with
bulb pin G entering slot of socket and turn it over
in direction shown to lock bulb pin G in position.
Replace lamp cover E and securely fasten it in
position with screw H.
5
Locks
Unlocks
94