Owner's manual

THREADING THE BOBBIN CASE
Pull thread at least 3 inches from
bobbin. Insert bobbin in bobbin
case so that thread will unravel
clockwise.
Pull thread into slot of bobbin
case as shown in Fig. 2.
Tension Spring
Draw thread under the tension
spring and into the fork-shaped
opening of the spring as shown
in Fig. 3.
Pull thread through hole in
bobbin case finger as shown in
Fig. 4. (Recommended for
zigzag sewing only)
TO ADJUST BOBBIN TENSION;
• Turn screw on side of bobbin
case clockwise to increase
tension.
• Turn screw on side of bobbin
case counterclockwise to
decrease tension.