Owner's manual
ADJUSTING FEED DOG HEIGHT
(TWIN NEEDLE UPPER THREADING)
• Follow threading instruction for single needle with
these exceptions.
• Place thread, matching or contrasting in color, on
both spool pins.
• Draw threads through thread guides as normal, but
separate the threads at the tension.
• Pass thread through the left disc and one thread
through the right disc.
• Now treat both threads as one until you reach the
needle eyes.
ZIGZAG DIAL: Set at desired width between "O" and
"3", if you set dial hi^er than 3, the needle will hit the
needle plate and break.
STITCH LENGTH: Set at desired stitch length.
• Upper position of feed dog is used for normal sewing.
To raise feed dog.
• Press drop feed button ".^"located under shuttle cover, to
upper position.
• Lower position is used for Embroidering, Mending or
Sewing on Button. Press drop feed button “M" to
lower position.
11