Owner's manual

CHANGING THE PRESSER FOOT
Raise needle bar to highest
position and raise presser foot
as shown.
The extra lift for heavy fabric
rriakes it easier to place fabric
under the presser foot.
TO REMOVE
THE PRESSER FOOT:
• Press lever on back of presser
foot shank and foot will drop
from shank as shown above,
• It is not necessary to loosen
the thumb screw to change
presser foot.
TO ATTACH
THE PRESSER FOOT:
• Align desired presser foot to
shank as shown above.
• Lower presser foot lever and
shank will automatically attach
to foot as shown above.