User guide

APPLIQUE WORK
Draw design on material to be
used as an applique and cut it out.
Place cut-out on base material
and baste it.
Sew around outline with zigzag
stitch adjusting stitch length and
width according to shape and
size of cut-out and type of base
material.
To change direction at corners,
or to sew very small circles, stop
machine, positioning needle just
away from edge of cut-out, lift
presser foot and turn material.
Lower presser foot and continue
sewing.
Sew a few stitches at end with
zigzag width at 0.
This is to prevent unstitching.
-37-