Installation Guide
Kitchen&BarSinks:Undermount
Undermount kitchen sinks are recommended when installing new
granite or solid surface countertops. Undermount installation adds
a luxurious and professional look to kitchen design and maximizes
countertop space. By installing your Sinkology kitchen sink under-
counter it makes wiping countertops easy and helps during kitchen
clean up.
1. Flip sink upside down on
a sheet of craft paper or
cardboard and trace the
outside rim of the sink. Select
preferred countertop offset.
See diagram. Measure the
distance between the edge of
the basin and the inside edge
of the lip. Add a second line
insidetherstaccordingto
this measurement. Cut out the template along the second line.
2. Place the template onto the countertop and cut the hole into
the countertop.
3. Use clear or Sinkology antique brown neutral cure 100% silicone
(#SINSTALL-101) on the rim of the sink. Mount sink under the
countertop using mounting hardware. Sinkology does not
provide under mounting hardware due to the wide variety of
mountingsurfaceswhichrequirespecichardware.Contactyour
countertopmanufacturerforspecicmountinghardware.
4. Ensuresinkismountedatagainstcountertoponallsides,
adjust hardware as needed.
5. Use plumbers putty to install the drain. Clean excess.
6. To complete your install we recommend applying a thin bead of
Sinkology antique brown or clear neutral cure 100% silicone to
any gaps between sink and countertop.
7. For regular maintenance simple wash with gentle soap and
water. For extra protection against water spotting, use Sinkology
Copper Armor care kit (#SARMOR-101) or high quality carnauba
wax.
8. Register your new sink at sinkology.com/registration.
Important
Sinkology undermount kitchen sinks do not include mounting hardware.
Werecommendprovidingyoursinkdetailstoyourcountertop
manufacturer for approved mounting hardware and method.
29
PRO
DIY