Installation Guide

Bath Sink: Drains
Sinkology bathroom sink drains are constructed of solid bass and
handnishedtocomplementSinkologybathroomsinks.Sinkology
grid and pop-up bath sink drains work with most standard No-
OverowsinksandareprotectedbyaLifetimeWarranty.
1. Washanddrythesinkandthe
drain.
2. Remove lock nut, rubber
washer and white plastic
washer from drain stem.
3. Apply plumbers putty on the
underside of the drain lip
and slide the drain into sink
drain hole. The drain and the metal of the sink will be touching
with a thin layer of plumbers putty creating a water tight seal
aroundthedrain.Wipeoffexcessplumbersputty,itcouldstain
your copper sink.
4. If you do not have a vessel sink, skip to Step 5. If you have a
Sinkology copper vessel sink you should have received a large
steel washer with your sink. This washer slides up the drain
piperst.
5. Slide the rubber washer onto the drain stem until up against
bottom of sink or vessel washer. Slide on white washer then
lock nut onto threads until drain is tight and secure.
6. Test all connections for leaks.
Important
Sinkologybathdrainsfeatureano-overowdesignandshouldonlybe
installedintobathroomsinkswithoutoverowholes.Ifyoursinkhasan
overow,youwillneedtopurchaseanoverowsinkdrain,availableat
most retailers. See diagram.
13
PRO
DIY