User Manual

40
Signal Indicator
SATELLITE
- +
+
-
TERRESTRIAL
Finder at www.siriusxm.com/
fmchannel. Go to the website and
enter your zip code. The Channel
Finder will suggest a list of available
FM channels in your area. For
convenience, write down or print out
the list.
OR
b. Manually tune through your local FM
channels on your vehicle’s FM radio.
Locate and create a list of channels that aren’t being used by any FM
radio station. Write down the list. Once you have created your list of
available FM channels, you will need to find the one that provides the
best match for Onyx EZ.
TIP! You’ll need to use the ‘Manual’ tune function on your vehicle’s FM radio
to tune through every FM channel one-by-one. Turn on your vehicle’s FM
radio. Start at 88.1 and use the ‘Manual’ tune function on your vehicle’s FM
radio to tune through each FM channel one-by-one (88.1 followed by 88.3
etc.) to locate channels that aren’t being used by a local FM radio station.
Write down each FM channel that has only static or silence on it, until you
reach 107.9.
6. Ensure Onyx EZ is tuned to channel 1, the XM Preview channel. Upon
power up, Onyx EZ should tune to channel 1 by default, when it’s not yet
activated. If it’s not on channel 1, refer to “Listening to Satellite Radio” on
page 48 to learn about how to tune a channel.
7. Pick the first FM channel on your list from step 5. Turn on your vehicle’s
FM radio (if you have not already done so) and tune it to this FM channel.
NOTE! If you are using the Vehicle Dock from the Universal Xpress Car Kit
instead of the PowerConnect Vehicle Dock which came with your Onyx EZ,
you will have to disable AUX Detect. Refer to “Using the Vehicle Dock From
the Universal Xpress Car Kit” on page 76, and complete the additional
Vehicle Installation