User Manual

41
instructions before continuing with the next step. The
audio connection will be through your vehicle’s FM
radio, but it is not PowerConnect.
8. Set your Onyx EZ to transmit on the same FM
channel that you have selected in step 7:
i. Press menu.
ii. Press
to scroll to and highlight
FM Settings and press the Select
button
.
iii. FM Channels will be highlighted. If it
is not highlighted, press
to scroll
to and highlight FM Channels. Press
the Select button.
iv. Press to scroll to and highlight
the storage location FM 2 and
press the Select button
.
v. Tune to the available FM channel
you choose in step 3. Press and
to tune in steps of .2, i.e., 99.3 to
99.5. Press
and to tune in
steps of 1, i.e., 99.3 to 100.3. Press
the Select button to select the FM
channel.
2
34567890
direct
jump
FM
menu
1
90.1
MATCH FM CHANNELS
Set your vehicle radio to the
above channel to enable audio.
99.3 FM
current
FM 1
FM 2
FM 3
FM 4
FM 5
97.9
___
___
___
___
FM Channels
Vehicle Installation