User Manual

49
Direct Tune
A channel can be tuned directly by entering
the channel number using the number
buttons.
1. To directly tune to a channel press
direct
.
2. Use the number buttons 0-9 to enter
the channel number and wait a moment
until the channel is tuned, or press the
Select button to immediately tune to
the channel.
Return to Main Display Screen
Pressing and holding menu in most instances will return you to the main
display screen. In some cases, you may need to follow the instructions on
the display screen.
Jump
Depending upon how you configure the mode, pressing jump will either
go to the traffic and weather channel for the city of your choice, which you
select from a list of the 22 most congested cities, or go to the previous
channel to which you were listening.
If Jump is set to Traffic, when you press jump and the traffic/weather
broadcast of your selected city is not immediately available, a message will
be displayed at the bottom of the screen to indicate that a jump is pending.
Once the traffic/weather report is ready to be broadcast, the Radio will
Direct Tune
Enter channel #
6 2 _
Using Your Onyx EZ