User Manual

76
Using the Vehicle Dock From the Universal Xpress Car Kit
If you have chosen to use the Vehicle Dock from the
Universal Xpress Car Kit rather than the PowerConnect
Vehicle Dock included with your Onyx EZ Radio, you
will need to complete some additional installation steps.
When you have completed these additional steps, you
can continue with the installation of your Onyx EZ.
When you are using the Universal Xpress Vehicle
Dock, the screen will initially display “AUX Connected”
when you power on your Onyx EZ. Ignore this
message. Once you have completed the steps below,
it will not be displayed again.
If you are connecting the audio through your vehicle’s FM radio
(SureConnect or FMDA):
1. Disable the AUX Detect feature. Refer to “AUX Detect” on page 70,
and disable AUX Detect.
2. Turn the FM Transmitter in Onyx EZ On. Refer to “Turn FM Transmitter
On/Off” on page 77, and turn the FM Transmitter On.
3. Continue with the installation.
If you are connecting the audio using the Aux In Cable or Cassette Adapter:
1. Disable the AUX Detect feature. Refer to “AUX Detect” on page 70,
and disable AUX Detect.
TIP! The FM Transmitter must be Off. To verify that the FM Transmitter is Off,
refer to “Turn FM Transmitter On/Off” on page 77.
2. Continue with the installation.
Audio enabled through
auxiliary line. FM turned OFF.
AUX Connected
Configuring Your Onyx EZ