Warranty

PUMP INSTALLATION

Before installation, check you local electrical and plumbing regulations. These

regulations are for your safety

Use the pump dimensional drawing to ensure proper installation

Make sure the cables are not kinked or nipped

Ensure that hoses and valves are suitable for the pressure of the pump. Place the

pump on a flat base and make sure it cannot fall over or sink

Make sure that the pump cannot rotate at the startup or during operation

Should there be any problems that occur during installation, please get in touch with

a Site Drainer representative

DO NOT dismantle the product before/during installation without any authorized

instructions from Site Drainer

THE NON- CLOGGING SOLUTION