Warranty

MAINTENANCE AND INSPECTION

Regular checkups and preventive maintenance will ensure a more reliable and safe

operation. An initial inspection of the pump within 3 to 4 months after installation

is recommended. Subsequent inspections/maintenance can be carried out every

6 months

Always disconnect the pump from the power supply before inspecting the pump

Make sure that the pump cannot roll or fall over to injure people and damage

property

Rinse the pump thoroughly with clean water before working on the pump

The pump should not be activated if it is partially dismantled

Worn impellers often have very sharp edges. Be very careful when replacing them.

THE NON- CLOGGING SOLUTION