Warranty

SAFETY INFORMATION
Pump water only
Never use worn or damaged cables. Inspect for cuts in the insulation.
Never attempt to use the power cord as a lifting or lowering device for the
pump
Always lift the pump by it’s carrying handle or attached rope to carrying
handle
Always make sure electrical circuits are properly grounded
A fully submerged pump in liquid will not freeze, unless the liquid freezes
Do not allow a partially submerged pump to freeze. The expansion of water
freezing in the volute may crack the pump. If there is danger of the pump
being subjected to freezing temperatures, lift the pump from the water and
allow it to drain thoroughly
THE NON- CLOGGING SOLUTION
TM
8