Instructions / Assembly

ManualsBrandsSIXTH AVENUE BUILDING PRODUCTS SUPPLYING THE WORLD ManualsFencingBelfast 4 in. x 4 in. x 8 ft. Tan Vinyl Fence Post Kit

Belfast Fence

Installation Guide:

Tools Required:

 Screwdriver

 Level

 Measuring Tape

 String Line

 Pencil/Marker

Optional Tools:

 Power drill

 Post hole digger

 Powered saw

Required Accessories:

 Concrete (sold separately)

 PVC Glue (sold separately)

Optional Accessories:

 Gravel

Planning

 Prior to installation, check with your local regulatory agency for local code requirements.

 Contact your utility company to locate and mark underground lines.

 Draw the layout of your fence and calculate the number of panels, gates, posts, brackets

and caps needed for your project.

 Careful planning and measurement of your fence project is essential, as moving posts after

the concrete sets is extremely difficult. Many yards are relatively level and will allow for a

fairly simple installation. lf your yard is steeply pitched or is very uneven, be sure to allow

for the required mounting height of the adjacent panel when setting your posts. You may

need to “stair step" the panels in extreme cases. (See Figure1)

 Measure your gates first to determine the width of the gate opening ( including space

for hardware ) Be sure to allow enough clearance on the bottom of the gate it to swing

freely

 We recommend allowing a minimum 2” clearance between the bottom of the panel and

ground

Summary of content (4 pages)

PAGE 1
Belfast Fence Installation Guide: Tools Required:  Screwdriver  Level  Measuring Tape  String Line  Pencil/Marker Optional Tools:  Power drill  Post hole digger  Powered saw Required Accessories:  Concrete (sold separately)  PVC Glue (sold separately) Optional Accessories:  Gravel Planning  Prior to installation, check with your local regulatory agency for local code requirements.  Contact your utility company to locate and mark underground lines.
PAGE 2
Digging Post Holes  Dig postholes 10” to 12″in diameter and 30” to 36” deep (based on local ordinance or expected frost depth in winter).  Check measurement of fence. Actual size of the panel varies by description and model number. (See Figure2) for specific panel dimensions.  Use a string line to insure all post holes are inline and verify spacing between holes.
PAGE 3
wider than the suggested dimension. Layout and Posts and Panels Installation  The location of your gate will determine the layout of the posts for the fence line. The width of your gate will determine the spacing between your gate posts  To make sure your fence run is straight, install line stakes and run a string line.
PAGE 4
Tile diagrams and instructions shown are for illustration purposes only and are not meant to replace a licensed professional. Any construction or use of the product must be in accordance with all local zoning and/or building codes. The consumer assumes all risks and liability associated with the construction or use of this product.