Instructions / Assembly

Digging Post Holes
 Dig postholes 10” to 12″in diameter and 30” to 36” deep (based on local ordinance or
expected frost depth in winter).
 Check measurement of fence. Actual size of the panel varies by description and model
number. (See Figure2) for specific panel dimensions.
 Use a string line to insure all post holes are inline and verify spacing between holes. Double
check all measurements!
lnstalling Brackets to Posts
 Prepare the fence panels by sliding the mounting brackets onto the rails with the open
space to the top.
 Slide the bracket fully on to the rail.
 Holding the bracket in place, install one bracket screw into upper slotted holes. (Fig. 3)
 This will temporarily hold the bracket to the panel when you place the complete paneI
between the posts. Do this for all brackets on each fence panel prior to installation. Later,
you will be able to adjust the bracket to get a perfect fit if your post opening is slightly